Sames's Fstart S spray guns make it easy and cost-effective to apply water-based or solvent-based coatings.
Conventional sprayers are available to meet the needs of small to large finishing shops. The Fstart S spray guns can be used by both beginners and experienced professionals giving a desired high quality finish.
The Fstart spray guns are the result of 95 years of experience in Airspray technology. In addition to being an economical solution, this new Airspray gun has a comfortable and ergonomic design and is one of the lightest guns in its class.
| Designation | Value | Unit: metric (US) |
|---|---|---|
| Maximum Fluid Pressure | 6 (87) | bar (psi) |
| Maximum Air Pressure | 6 (87) | bar (psi) |
| Maximum Fluid Temperature | 50 (122) | °C (°F) |
| Air Inlet | M 1/4" NPS | |
| Fluid Inlet | M 3/8" NPS | |
| Stainless Steel, Aluminum Wetted Parts | ♦ | |
| Recommended CONV Air Pressure | 2.5 (36) – 3.5 (51) | bar (psi) |
| Air Consumption CONV (at 2.5 - 3.5 bar / at 36 - 51 psi) | 21.3 (12.5) | m3/h (cfm) |
| Trigger Pull | 16 (3.6) | N (lbs) |
| Tank Capacity | 1 (0.26) | l (gal) |
| Weight | 402 (14.2) | g (oz) |
| Designation | Technology | Nozzle size | Fluid output | Max fan width at 20cm (8in) | Part number |
|---|---|---|---|---|---|
| Gun FStart S CONV-15-Mva | CONV | 1.5 | 260 cc/mn (8.8 oz/mn) | M: 20 - 30 cm (7.9 - 11.8 in) | 135756515 |
| Gun FStart S CONV-18-Mva | CONV | 1.8 | 290 cc/min (9.8 oz/min) | M: 20 - 30 cm (7.9 - 11.8 in) | 135756518 |
| Designation | Capacity | Part number | |||
|---|---|---|---|---|---|
| Aluminum suction cup | 1L | 138400000 |
| Designation | Part number | |
|---|---|---|
| Maintenance kit for FStart P/S | 129756902 | |
| Aircap FStart S CONV-1518-Mva | 132756510 | |
| Nozzle + Needle FStart CONV-15 | 131756215 | |
| Nozzle + Needle FStart CONV-18 | 131756218 |
Format : application/pdf
Size : 508Ko
Format : application/pdf
Size : 14Mo
Format : application/pdf
Size : 3Mo
Format : application/pdf
Size : 1Mo
